How to Make Chalkboard Place Card Napkin Rings

Fast and easy. That about sums up these place marks napkin rings. Supplies are minimal. Check it out:

• wood name tags (found mine at Michaels for 29 cents a piece)
• spray-can primer
• spray-can chalkboard paint
• 150 grit sand paper
• ribbon, twine, etc.

I used the sand paper to smooth out the tags, then shot them front and back with the primer.

I chose a ‘front’ for the tags and shot that with two coats of the chalkboard paint. I also sanded between coats for a smooth finish.

Then it was just a matter of slipping a bit of ribbon through the holes in the tags. See? Fast and easy.